*****************
Beyond the Basics
*****************

|    The voyage of discovery is not in seeking new landscapes but in having
|    new eyes.
|    --- *Marcel Proust*

|    Discovery is seeing what everyone else has seen and thinking what no
|    one else has thought.
|    --- *Albert Szent-Gyorgi*


Iterating over elements in the array
====================================

.. _`sec:array_iterator`:

Basic Iteration
---------------

One common algorithmic requirement is to be able to walk over all
elements in a multidimensional array. The array iterator object makes
this easy to do in a generic way that works for arrays of any
dimension. Naturally, if you know the number of dimensions you will be
using, then you can always write nested for loops to accomplish the
iteration. If, however, you want to write code that works with any
number of dimensions, then you can make use of the array iterator. An
array iterator object is returned when accessing the .flat attribute
of an array.

.. index::
   single: array iterator

Basic usage is to call :c:func:`PyArray_IterNew` ( ``array`` ) where array
is an ndarray object (or one of its sub-classes). The returned object
is an array-iterator object (the same object returned by the .flat
attribute of the ndarray). This object is usually cast to
PyArrayIterObject* so that its members can be accessed. The only
members that are needed are ``iter->size`` which contains the total
size of the array, ``iter->index``, which contains the current 1-d
index into the array, and ``iter->dataptr`` which is a pointer to the
data for the current element of the array.  Sometimes it is also
useful to access ``iter->ao`` which is a pointer to the underlying
ndarray object.

After processing data at the current element of the array, the next
element of the array can be obtained using the macro
:c:func:`PyArray_ITER_NEXT` ( ``iter`` ). The iteration always proceeds in a
C-style contiguous fashion (last index varying the fastest). The
:c:func:`PyArray_ITER_GOTO` ( ``iter``, ``destination`` ) can be used to
jump to a particular point in the array, where ``destination`` is an
array of npy_intp data-type with space to handle at least the number
of dimensions in the underlying array. Occasionally it is useful to
use :c:func:`PyArray_ITER_GOTO1D` ( ``iter``, ``index`` ) which will jump
to the 1-d index given by the value of ``index``. The most common
usage, however, is given in the following example.

.. code-block:: c

    PyObject *obj; /* assumed to be some ndarray object */
    PyArrayIterObject *iter;
    ...
    iter = (PyArrayIterObject *)PyArray_IterNew(obj);
    if (iter == NULL) goto fail;   /* Assume fail has clean-up code */
    while (iter->index < iter->size) {
        /* do something with the data at it->dataptr */
        PyArray_ITER_NEXT(it);
    }
    ...

You can also use :c:func:`PyArrayIter_Check` ( ``obj`` ) to ensure you have
an iterator object and :c:func:`PyArray_ITER_RESET` ( ``iter`` ) to reset an
iterator object back to the beginning of the array.

It should be emphasized at this point that you may not need the array
iterator if your array is already contiguous (using an array iterator
will work but will be slower than the fastest code you could write).
The major purpose of array iterators is to encapsulate iteration over
N-dimensional arrays with arbitrary strides. They are used in many,
many places in the NumPy source code itself. If you already know your
array is contiguous (Fortran or C), then simply adding the element-
size to a running pointer variable will step you through the array
very efficiently. In other words, code like this will probably be
faster for you in the contiguous case (assuming doubles).

.. code-block:: c

    npy_intp size;
    double *dptr;  /* could make this any variable type */
    size = PyArray_SIZE(obj);
    dptr = PyArray_DATA(obj);
    while(size--) {
       /* do something with the data at dptr */
       dptr++;
    }


Iterating over all but one axis
-------------------------------

A common algorithm is to loop over all elements of an array and
perform some function with each element by issuing a function call. As
function calls can be time consuming, one way to speed up this kind of
algorithm is to write the function so it takes a vector of data and
then write the iteration so the function call is performed for an
entire dimension of data at a time. This increases the amount of work
done per function call, thereby reducing the function-call over-head
to a small(er) fraction of the total time. Even if the interior of the
loop is performed without a function call it can be advantageous to
perform the inner loop over the dimension with the highest number of
elements to take advantage of speed enhancements available on micro-
processors that use pipelining to enhance fundmental operations.

The :c:func:`PyArray_IterAllButAxis` ( ``array``, ``&dim`` ) constructs an
iterator object that is modified so that it will not iterate over the
dimension indicated by dim. The only restriction on this iterator
object, is that the :c:func:`PyArray_Iter_GOTO1D` ( ``it``, ``ind`` ) macro
cannot be used (thus flat indexing won't work either if you pass this
object back to Python --- so you shouldn't do this). Note that the
returned object from this routine is still usually cast to
PyArrayIterObject \*. All that's been done is to modify the strides
and dimensions of the returned iterator to simulate iterating over
array[...,0,...] where 0 is placed on the
:math:`\textrm{dim}^{\textrm{th}}` dimension. If dim is negative, then
the dimension with the largest axis is found and used.


Iterating over multiple arrays
------------------------------

Very often, it is desirable to iterate over several arrays at the
same time. The universal functions are an example of this kind of
behavior. If all you want to do is iterate over arrays with the same
shape, then simply creating several iterator objects is the standard
procedure. For example, the following code iterates over two arrays
assumed to be the same shape and size (actually obj1 just has to have
at least as many total elements as does obj2):

.. code-block:: c

    /* It is already assumed that obj1 and obj2
       are ndarrays of the same shape and size.
    */
    iter1 = (PyArrayIterObject *)PyArray_IterNew(obj1);
    if (iter1 == NULL) goto fail;
    iter2 = (PyArrayIterObject *)PyArray_IterNew(obj2);
    if (iter2 == NULL) goto fail;  /* assume iter1 is DECREF'd at fail */
    while (iter2->index < iter2->size)  {
        /* process with iter1->dataptr and iter2->dataptr */
        PyArray_ITER_NEXT(iter1);
        PyArray_ITER_NEXT(iter2);
    }


Broadcasting over multiple arrays
---------------------------------

.. index::
   single: broadcasting

When multiple arrays are involved in an operation, you may want to use the
same broadcasting rules that the math operations (*i.e.* the ufuncs) use.
This can be done easily using the :c:type:`PyArrayMultiIterObject`.  This is
the object returned from the Python command numpy.broadcast and it is almost
as easy to use from C. The function
:c:func:`PyArray_MultiIterNew` ( ``n``, ``...`` ) is used (with ``n`` input
objects in place of ``...`` ). The input objects can be arrays or anything
that can be converted into an array. A pointer to a PyArrayMultiIterObject is
returned.  Broadcasting has already been accomplished which adjusts the
iterators so that all that needs to be done to advance to the next element in
each array is for PyArray_ITER_NEXT to be called for each of the inputs. This
incrementing is automatically performed by
:c:func:`PyArray_MultiIter_NEXT` ( ``obj`` ) macro (which can handle a
multiterator ``obj`` as either a :c:type:`PyArrayMultiObject *` or a
:c:type:`PyObject *<PyObject>`). The data from input number ``i`` is available using
:c:func:`PyArray_MultiIter_DATA` ( ``obj``, ``i`` ) and the total (broadcasted)
size as :c:func:`PyArray_MultiIter_SIZE` ( ``obj``). An example of using this
feature follows.

.. code-block:: c

    mobj = PyArray_MultiIterNew(2, obj1, obj2);
    size = PyArray_MultiIter_SIZE(obj);
    while(size--) {
        ptr1 = PyArray_MultiIter_DATA(mobj, 0);
        ptr2 = PyArray_MultiIter_DATA(mobj, 1);
        /* code using contents of ptr1 and ptr2 */
        PyArray_MultiIter_NEXT(mobj);
    }

The function :c:func:`PyArray_RemoveSmallest` ( ``multi`` ) can be used to
take a multi-iterator object and adjust all the iterators so that
iteration does not take place over the largest dimension (it makes
that dimension of size 1). The code being looped over that makes use
of the pointers will very-likely also need the strides data for each
of the iterators. This information is stored in
multi->iters[i]->strides.

.. index::
   single: array iterator

There are several examples of using the multi-iterator in the NumPy
source code as it makes N-dimensional broadcasting-code very simple to
write. Browse the source for more examples.

.. _user.user-defined-data-types:

User-defined data-types
=======================

NumPy comes with 24 builtin data-types. While this covers a large
majority of possible use cases, it is conceivable that a user may have
a need for an additional data-type. There is some support for adding
an additional data-type into the NumPy system. This additional data-
type will behave much like a regular data-type except ufuncs must have
1-d loops registered to handle it separately. Also checking for
whether or not other data-types can be cast "safely" to and from this
new type or not will always return "can cast" unless you also register
which types your new data-type can be cast to and from. Adding
data-types is one of the less well-tested areas for NumPy 1.0, so
there may be bugs remaining in the approach. Only add a new data-type
if you can't do what you want to do using the OBJECT or VOID
data-types that are already available. As an example of what I
consider a useful application of the ability to add data-types is the
possibility of adding a data-type of arbitrary precision floats to
NumPy.

.. index::
   pair: dtype; adding new


Adding the new data-type
------------------------

To begin to make use of the new data-type, you need to first define a
new Python type to hold the scalars of your new data-type. It should
be acceptable to inherit from one of the array scalars if your new
type has a binary compatible layout. This will allow your new data
type to have the methods and attributes of array scalars. New data-
types must have a fixed memory size (if you want to define a data-type
that needs a flexible representation, like a variable-precision
number, then use a pointer to the object as the data-type). The memory
layout of the object structure for the new Python type must be
PyObject_HEAD followed by the fixed-size memory needed for the data-
type. For example, a suitable structure for the new Python type is:

.. code-block:: c

    typedef struct {
       PyObject_HEAD;
       some_data_type obval;
       /* the name can be whatever you want */
    } PySomeDataTypeObject;

After you have defined a new Python type object, you must then define
a new :c:type:`PyArray_Descr` structure whose typeobject member will contain a
pointer to the data-type you've just defined. In addition, the
required functions in the ".f" member must be defined: nonzero,
copyswap, copyswapn, setitem, getitem, and cast. The more functions in
the ".f" member you define, however, the more useful the new data-type
will be.  It is very important to initialize unused functions to NULL.
This can be achieved using :c:func:`PyArray_InitArrFuncs` (f).

Once a new :c:type:`PyArray_Descr` structure is created and filled with the
needed information and useful functions you call
:c:func:`PyArray_RegisterDataType` (new_descr). The return value from this
call is an integer providing you with a unique type_number that
specifies your data-type. This type number should be stored and made
available by your module so that other modules can use it to recognize
your data-type (the other mechanism for finding a user-defined
data-type number is to search based on the name of the type-object
associated with the data-type using :c:func:`PyArray_TypeNumFromName` ).


Registering a casting function
------------------------------

You may want to allow builtin (and other user-defined) data-types to
be cast automatically to your data-type. In order to make this
possible, you must register a casting function with the data-type you
want to be able to cast from. This requires writing low-level casting
functions for each conversion you want to support and then registering
these functions with the data-type descriptor. A low-level casting
function has the signature.

.. c:function:: void castfunc( \
        void* from, void* to, npy_intp n, void* fromarr, void* toarr)

    Cast ``n`` elements ``from`` one type ``to`` another. The data to
    cast from is in a contiguous, correctly-swapped and aligned chunk
    of memory pointed to by from. The buffer to cast to is also
    contiguous, correctly-swapped and aligned. The fromarr and toarr
    arguments should only be used for flexible-element-sized arrays
    (string, unicode, void).

An example castfunc is:

.. code-block:: c

    static void
    double_to_float(double *from, float* to, npy_intp n,
           void* ig1, void* ig2);
    while (n--) {
          (*to++) = (double) *(from++);
    }

This could then be registered to convert doubles to floats using the
code:

.. code-block:: c

    doub = PyArray_DescrFromType(NPY_DOUBLE);
    PyArray_RegisterCastFunc(doub, NPY_FLOAT,
         (PyArray_VectorUnaryFunc *)double_to_float);
    Py_DECREF(doub);


Registering coercion rules
--------------------------

By default, all user-defined data-types are not presumed to be safely
castable to any builtin data-types. In addition builtin data-types are
not presumed to be safely castable to user-defined data-types. This
situation limits the ability of user-defined data-types to participate
in the coercion system used by ufuncs and other times when automatic
coercion takes place in NumPy. This can be changed by registering
data-types as safely castable from a particular data-type object. The
function :c:func:`PyArray_RegisterCanCast` (from_descr, totype_number,
scalarkind) should be used to specify that the data-type object
from_descr can be cast to the data-type with type number
totype_number. If you are not trying to alter scalar coercion rules,
then use :c:data:`NPY_NOSCALAR` for the scalarkind argument.

If you want to allow your new data-type to also be able to share in
the scalar coercion rules, then you need to specify the scalarkind
function in the data-type object's ".f" member to return the kind of
scalar the new data-type should be seen as (the value of the scalar is
available to that function). Then, you can register data-types that
can be cast to separately for each scalar kind that may be returned
from your user-defined data-type. If you don't register scalar
coercion handling, then all of your user-defined data-types will be
seen as :c:data:`NPY_NOSCALAR`.


Registering a ufunc loop
------------------------

You may also want to register low-level ufunc loops for your data-type
so that an ndarray of your data-type can have math applied to it
seamlessly. Registering a new loop with exactly the same arg_types
signature, silently replaces any previously registered loops for that
data-type.

Before you can register a 1-d loop for a ufunc, the ufunc must be
previously created. Then you call :c:func:`PyUFunc_RegisterLoopForType`
(...) with the information needed for the loop. The return value of
this function is ``0`` if the process was successful and ``-1`` with
an error condition set if it was not successful.

.. c:function:: int PyUFunc_RegisterLoopForType( \
        PyUFuncObject* ufunc, int usertype, PyUFuncGenericFunction function, \
        int* arg_types, void* data)

    *ufunc*

        The ufunc to attach this loop to.

    *usertype*

        The user-defined type this loop should be indexed under. This number
        must be a user-defined type or an error occurs.

    *function*

        The ufunc inner 1-d loop. This function must have the signature as
        explained in Section `3 <#sec-creating-a-new>`__ .

    *arg_types*

        (optional) If given, this should contain an array of integers of at
        least size ufunc.nargs containing the data-types expected by the loop
        function. The data will be copied into a NumPy-managed structure so
        the memory for this argument should be deleted after calling this
        function. If this is NULL, then it will be assumed that all data-types
        are of type usertype.

    *data*

        (optional) Specify any optional data needed by the function which will
        be passed when the function is called.

.. index::
   pair: dtype; adding new


Subtyping the ndarray in C
==========================

One of the lesser-used features that has been lurking in Python since
2.2 is the ability to sub-class types in C. This facility is one of
the important reasons for basing NumPy off of the Numeric code-base
which was already in C. A sub-type in C allows much more flexibility
with regards to memory management. Sub-typing in C is not difficult
even if you have only a rudimentary understanding of how to create new
types for Python. While it is easiest to sub-type from a single parent
type, sub-typing from multiple parent types is also possible. Multiple
inheritance in C is generally less useful than it is in Python because
a restriction on Python sub-types is that they have a binary
compatible memory layout. Perhaps for this reason, it is somewhat
easier to sub-type from a single parent type.

.. index::
   pair: ndarray; subtyping

All C-structures corresponding to Python objects must begin with
:c:macro:`PyObject_HEAD` (or :c:macro:`PyObject_VAR_HEAD`). In the same
way, any sub-type must have a C-structure that begins with exactly the
same memory layout as the parent type (or all of the parent types in
the case of multiple-inheritance). The reason for this is that Python
may attempt to access a member of the sub-type structure as if it had
the parent structure ( *i.e.* it will cast a given pointer to a
pointer to the parent structure and then dereference one of it's
members). If the memory layouts are not compatible, then this attempt
will cause unpredictable behavior (eventually leading to a memory
violation and program crash).

One of the elements in :c:macro:`PyObject_HEAD` is a pointer to a
type-object structure. A new Python type is created by creating a new
type-object structure and populating it with functions and pointers to
describe the desired behavior of the type. Typically, a new
C-structure is also created to contain the instance-specific
information needed for each object of the type as well. For example,
:c:data:`&PyArray_Type<PyArray_Type>` is a pointer to the type-object table for the ndarray
while a :c:type:`PyArrayObject *` variable is a pointer to a particular instance
of an ndarray (one of the members of the ndarray structure is, in
turn, a pointer to the type- object table :c:data:`&PyArray_Type<PyArray_Type>`). Finally
:c:func:`PyType_Ready` (<pointer_to_type_object>) must be called for
every new Python type.


Creating sub-types
------------------

To create a sub-type, a similar procedure must be followed except
only behaviors that are different require new entries in the type-
object structure. All other entries can be NULL and will be filled in
by :c:func:`PyType_Ready` with appropriate functions from the parent
type(s). In particular, to create a sub-type in C follow these steps:

1. If needed create a new C-structure to handle each instance of your
   type. A typical C-structure would be:

   .. code-block:: c

        typedef _new_struct {
            PyArrayObject base;
            /* new things here */
        } NewArrayObject;

   Notice that the full PyArrayObject is used as the first entry in order
   to ensure that the binary layout of instances of the new type is
   identical to the PyArrayObject.

2. Fill in a new Python type-object structure with pointers to new
   functions that will over-ride the default behavior while leaving any
   function that should remain the same unfilled (or NULL). The tp_name
   element should be different.

3. Fill in the tp_base member of the new type-object structure with a
   pointer to the (main) parent type object. For multiple-inheritance,
   also fill in the tp_bases member with a tuple containing all of the
   parent objects in the order they should be used to define inheritance.
   Remember, all parent-types must have the same C-structure for multiple
   inheritance to work properly.

4. Call :c:func:`PyType_Ready` (<pointer_to_new_type>). If this function
   returns a negative number, a failure occurred and the type is not
   initialized. Otherwise, the type is ready to be used. It is
   generally important to place a reference to the new type into the
   module dictionary so it can be accessed from Python.

More information on creating sub-types in C can be learned by reading
PEP 253 (available at http://www.python.org/dev/peps/pep-0253).


Specific features of ndarray sub-typing
---------------------------------------

Some special methods and attributes are used by arrays in order to
facilitate the interoperation of sub-types with the base ndarray type.

The __array_finalize\__ method
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

.. attribute:: ndarray.__array_finalize__

   Several array-creation functions of the ndarray allow
   specification of a particular sub-type to be created. This allows
   sub-types to be handled seamlessly in many routines. When a
   sub-type is created in such a fashion, however, neither the
   __new_\_ method nor the __init\__ method gets called. Instead, the
   sub-type is allocated and the appropriate instance-structure
   members are filled in. Finally, the :obj:`~numpy.class.__array_finalize__`
   attribute is looked-up in the object dictionary. If it is present
   and not None, then it can be either a CObject containing a pointer
   to a :c:func:`PyArray_FinalizeFunc` or it can be a method taking a
   single argument (which could be None).

   If the :obj:`~numpy.class.__array_finalize__` attribute is a CObject, then the pointer
   must be a pointer to a function with the signature:

   .. code-block:: c

       (int) (PyArrayObject *, PyObject *)

   The first argument is the newly created sub-type. The second argument
   (if not NULL) is the "parent" array (if the array was created using
   slicing or some other operation where a clearly-distinguishable parent
   is present). This routine can do anything it wants to. It should
   return a -1 on error and 0 otherwise.

   If the :obj:`~numpy.class.__array_finalize__` attribute is not None nor a CObject,
   then it must be a Python method that takes the parent array as an
   argument (which could be None if there is no parent), and returns
   nothing. Errors in this method will be caught and handled.


The __array_priority\__ attribute
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

.. attribute:: ndarray.__array_priority__

   This attribute allows simple but flexible determination of which sub-
   type should be considered "primary" when an operation involving two or
   more sub-types arises. In operations where different sub-types are
   being used, the sub-type with the largest :obj:`~numpy.class.__array_priority__`
   attribute will determine the sub-type of the output(s). If two sub-
   types have the same :obj:`~numpy.class.__array_priority__` then the sub-type of the
   first argument determines the output. The default
   :obj:`~numpy.class.__array_priority__` attribute returns a value of 0.0 for the base
   ndarray type and 1.0 for a sub-type. This attribute can also be
   defined by objects that are not sub-types of the ndarray and can be
   used to determine which :obj:`~numpy.class.__array_wrap__` method should be called for
   the return output.

The __array_wrap\__ method
^^^^^^^^^^^^^^^^^^^^^^^^^^

.. attribute:: ndarray.__array_wrap__

   Any class or type can define this method which should take an ndarray
   argument and return an instance of the type. It can be seen as the
   opposite of the :obj:`~numpy.class.__array__` method. This method is used by the
   ufuncs (and other NumPy functions) to allow other objects to pass
   through. For Python >2.4, it can also be used to write a decorator
   that converts a function that works only with ndarrays to one that
   works with any type with :obj:`~numpy.class.__array__` and :obj:`~numpy.class.__array_wrap__` methods.

.. index::
   pair: ndarray; subtyping
